Installing HighPoint WebGUI on FreeNAS 9.10
How to Install the Highpoint WebGUI on FreeNAS via USB
- After system booted, type 9 to enter the shell.
- Plug in USB drive containing Highpoint WebGUI
- Find which device is your USB.
mount -uw / mount -t msdosfs /dev/da31s1 /mnt (your device name will most likely be different) cd /mnt pkg add hptsvr-1.0.5-amd64.txz
To view the WebGUI, go to a another computer with a web browser and enter your NAS box IP address followed by the port number 7402.
How to Install the Highpoint WebGUI on FreeNAS via WGET
Mount FreeNAS root filesystem with write permissions from a shell prompt
mount -uw /
Download the FreeBSD version of the NON-RAID webgui from http://www.45drives.com/support/downloads/ using:
Note: If the above command doesnt work. Please verify you are using the correct URL from our Downloads page http://www.45drives.com/support/downloads/
Extract the downloaded file:
tar -xzf Non_RAID_WebGUI_FreeBSD10.x_v1.0.5_16_05_05.tgz ( or whatever the filename is )
Install the package with:
pkg add hptsvr-1.0.5-amd64.tbz ( or whatever the filename is after extracting )
Reboot the system
It can then be accessed at http://<machine.ip.address>:7402 ( eg: http://192.168.1.25:7402 )
- Default username is: RAID ( all capitals )
- Default password: hpt ( all lowercase )